Home » Product » Gas hot water urn WU-6

Gas hot water urn WU-6

Category:

This solid stainless steel “little beauty” is one of its kind on the Australian market. A must have for mobile caterers, venues, schools and community organisations anywhere! Gas boiling water urn, all stainless steel panels and frame, flame failure safety device, high/low burner control, piezo ignition, available in LPG or natural gas with global mark approval and EASY to use! Like all Cookon products, our urn is built to last and is the only urn you will ever need to buy. Take it anywhere, or connect it to your gas supply permanently.

AVAILABLE MODELS

WU-6 – Gas Hot Water Urn

DIMENSIONS (MM):

Appliance: 344 x 411 x 647

GAS TYPE:

LPG as Standard (Natural on request)

GAS CONNECTION:

WU-6 @ 13.5MJ/hr

Group-215

GAS TYPE

LPG as standard
(Natural on request)

GAS CONNECTION

WU-6 @ 13.5MJ/hr

GAS RATINGS

GA-102405-009

DIMENSIONS (MM)

Appliance: 344 x 411 x 647

CAPACITY (LITRES)

WU-6: 29

UNIT WEIGHT (KG)

WU-6: 18

Gas-hot-water-

Conversion Procedure

ENSURE water tank is empty and cold. Remove the four screws holding tank in place. Pull the tank vertically up where the burner and thermocouple are accessible. Remove the burner securing strap and thermocouple. Remove burner.

Replace the injector:

  1. Natural Gas Propane : remove 1.75mm injector and replace with 1.07mm
  2. Propane Natural Gas : remove 1.07mm injector and replace with 1.75mm
  3. Replace burner and thermocouple. Replace tank and secure.
  4. Finally replace rating plate.

Outer Panels:

Material-304 No8 S/S

Thickness-1.2mm

Standard- Australian

Standards

Finish No8

Inner Panels:

Material-304 No8 S/s

Thickness-1.2mm

Standard Australian

Standards

Finish-No8

Insulation:

Material-Millboard

Thickness-6mm

Location-Inner Lower Section

Gas-hot-water-urn-WU

Appliance Regulator:

Make – BROMIC PTY LTD

Model – REG-6160788

Gas Type- Natural Gas

Certification No. – AGA No. 5862

Appliance Regulator:

Make – BROMIC PTY LTD

Model -REG-6160888

Gas Type-LPG (Propane)

Certification No. – AGA No. 5862

Gas Bottle Regulator:

Make – GASMATE

Model – REG-GMBBQHRA

Gas Type- LPG (Propane)

Certification No. – AGA No. 7030

Valves:

Make-KEEFER BROS. (VIc) PTY LTD

Model-CoC-KB212

Certification No. – AGA No. 2143

Connection -1/8

Safety Valve:

Make-SIT GAS CONTROLS PTY LTD (AUSTRALIA)

Model-M1c-cO400096

Certification No. – AGA No. 3532

Connection-1/4″

Thermocouple:

Make-SIT GAS CONTROLS PTY LTD (AUSTRALIA)

Model-THE-0200042

Location Near Burner

Test Point:

Make – SYSTEM CONTROL ENGINEERING PTY LTD

Model-PO1-TEST

Location-See Detail 7: Underside View, pg. 15s

Gas-hot-water-urn-WU

Ignition System:

Description – PIEZO HIGH TEMP Y124441

Make – SIT GAS CONTROLS PTY LTD (AUSTRALIA)

Model-PIE-Y124441

Location Front of unit

Gas-hot-water-urn-WU

Contact Us Today

For more information on our commercial kitchen equipment suppliers, contact us today or call us on (07) 3267 1133.

Model

PO-1/2

Reviews

There are no reviews yet.

Be the first to review “Gas hot water urn WU-6”